Quality Polyethylene Tubing

Low Density Polyethylene

Brotec low density polyethylene is a very popular flexible low cost material. Ideal for irrigation, low pressure pneumatics, water sampling, chemical lines, beverage conveyance and for food contact applications. Meets the Australian Standard AS2070-1999 Section 4.1.1(a) and the requirements of FDA 21 CFR 177.1520© 2.1for food contact. For use in areas not affected by heat and preferably away from direct sunlight. Polyethylene has excellent chemical resistance and is available in imperial sizes 3/16″ to 1.0″ and metric sizes 4mm to 16 mm.

Medium Density Polyethylene

Brotec medium density polyethylene is an ideal compromise between the hardness of High Density and the flexibility of Low Density. Hardness is biased more toward High Density. Brotec have recently supplied the Victorian Desalination Plant with a grade of medium density polyethylene for prolonged outdoor application.

High Density Polyethylene

Brotec high density polyethylene is a popular engineering plastic. Most commonly made to customer specifications, the material has high strength and hardness. High density polyethylene is used for fixed pneumatic installations and for food and beverage networks.

Polypropylene

Brotec polypropylene tubing also meets Australian and FDA standards for food contact. Polypropylene has excellent chemical resistance and is suitable for use in chlorinated water applications.

For further information on our quality nylon and polyethylene tubing, contact Brotec on (03) 9770 8787 or submit an online contact form.

pdf

Ldpe-hdpe_chemical_resistancewebsite

LOW DENSITY
POLYETHYLENE MINIMUM BURST PRESSURE 500PSI @ 20DEG C
BROTEC PART NO. DESCRIPTION
  IMPERIAL
LDI02 LDPE 3/16" O.D. X .118" I.D.
LDI03 LDPE 1/4" O.D. X .157" I.D.
LDI04 LDPE 5/16" O.D. X .204" I.D.
LDI05 LDPE 3/8" O.D. X .260" I.D.
LDI06 LDPE 1/2" O.D. X .315" I.D.
LDI07 LDPE 5/8" O.D. X .500 I.D
 
  METRIC
 
LDM01 LDPE 4mm O.D. X 2.7mm I.D.
LDM02 LDPE 5mm O.D. X 3.3mm I.D.
LDM03 LDPE 6mm O.D. X 4mm I.D.
LDM04 LDPE 8mm O.D. X 5.2mm I.D.
LDM05 LDPE 10mm O.D. X 6.6mm I.D.
LDM06 LDPE 12mm O.D. X 8mm I.D.
 
  MINIMUM BURST PRESSURE 250PSI @ 20DEG C
 
LDM07 LDPE 8mm O.D. X 6mm I.D.
LDM08 LDPE 10mm O.D. X 8mm I.D.
LDM09 LDPE 12mm O.D. X 10mm I.D.
 
  STANDARD COIL LENGTHS ARE 100 METRES
  AVAILABLE IN STANDARD COLOURS
  BLACK,NATURAL,BLUE,RED,GREEN,YELLOW
  CONFORMS TO AS2070 PART1 FOR FOOD CONTACT


Quick Contact

contact us

Phone No. : (03) 9770 8787

 

Telefax No. : (03) 9770 8788


E-mail : info@brotec.com.au